Buying Guide: Diamonds / Necklaces / Rings / Stud Earrings / Bracelets

Buying Guide: Diamonds / Necklaces / Rings / Stud Earrings / Bracelets

DANFÉE · The Diamond Edit

Find your diamond, then choose the jewelry you love. Start with this simple guide to shape, the 4Cs and size before comparing necklaces, rings, studs and bracelets.

Part I. Diamond Selection Guide

1. How to Choose Your Diamond

Set your budget, then compare the 4Cs: cut, color, clarity and carat weight. Finish by choosing your preferred shape and checking the individual diamond's photographs, video and report.

Cut: brightness and sparkle

Cut describes how a diamond is fashioned and interacts with light. Compare sparkle in motion, proportions and the report's cut assessment.

Shallow profile Balanced profile Deep profile
Schematic side profiles of shallow, balanced and deep diamonds
Photograph of a round brilliant diamond showing an arrow pattern of facet reflections
Real diamond reference: a round brilliant with an arrow pattern of reflections. The photograph illustrates facet appearance, rather than establishing a cut grade.
Photo: Sandypandya, via Wikimedia Commons · CC BY-SA 4.0. Original image, displayed at a smaller size.

GIA cut grades: Excellent · Very Good · Good · Fair · Poor.

The profiles illustrate depth only; they do not determine a cut grade. GIA's overall cut grade applies to standard round brilliant diamonds in the D–Z range. Assess fancy shapes individually.

Color: compare the visible difference

The D–Z scale describes increasing color. Compare diamonds under similar lighting and with your chosen metal before paying for a higher grade.

D–F G–J K–M N–R S–Z
Schematic progression from a colorless appearance to increasingly visible color
Colorless Near colorless Faint Very light Light
Real round brilliant loose diamond photographed on a pale neutral surface
Real diamond reference: lighting and surrounding reflections affect apparent color. Use the laboratory report for the stone's color grade.
Photo: Petra Gems, via Wikimedia Commons · CC BY-SA 4.0. Original image, displayed at a smaller size.

Illustrations show a simplified color progression, not calibrated grades. The normal color range can include yellow, brown or gray; fancy-color diamonds are evaluated differently.

Clarity: check what you can see

Clarity considers inclusions and surface blemishes under 10× magnification. Compare the report with close-up images and ask whether any characteristics are visible at a normal viewing distance.

FL IF VVS1–VVS2 VS1–VS2 SI1–SI2 I1–I3
Simplified clarity illustrations with increasingly visible inclusions
Flawless Internally flawless Very, very slightly included Very slightly included Slightly included Included
Close-up diamond photograph with a magnified inset showing an inclusion
Real diamond reference: a photographic close-up with a magnified inclusion detail. Enlarged features may be less visible at normal viewing distance.
Photo: VVDiamonds, via Wikimedia Commons · CC BY-SA 4.0. Original image, displayed at a smaller size.

These symbols explain the concept only. A clarity grade depends on the size, nature, position and visibility of characteristics, not their count alone. No grade by itself guarantees an eye-clean appearance.

Carat: weight and visible size

1 ct = 0.2 g. Carat measures weight. Compare actual dimensions for visible size, and check whether the stated weight is per stone, the center stone or the total for the piece.

0.50 ct 1.00 ct 1.50 ct 2.00 ct 3.00 ct
Illustrative round diamonds with increasing relative diameters
5.1 mm / 0.201 in 6.4 mm / 0.252 in 7.4 mm / 0.291 in 8.1 mm / 0.319 in 9.3 mm / 0.366 in
One-carat brilliant-cut diamond photographed on a red surface
Real diamond reference: a one-carat brilliant-cut diamond, as identified by the photographer. The image is enlarged and is not an actual-size measurement.
Photo: Mauro Cateb, via Wikimedia Commons · CC BY-SA 4.0. Original image, displayed at a smaller size.
Illustrative round diamond size comparison on a hand, labeled 0.1 ct to 5.0 ct on a deep navy background
Illustrative diamond size comparison on a hand, labeled 0.1–5.0 ct. Use this as a visual reference and confirm the individual diamond's measurements. The image is not shown at actual size. Tap to enlarge.

2. Diamond Shapes & Size Reference

Diamond shape reference showing round, princess, emerald, oval, cushion, pear, marquise and radiant outlines
Shape reference illustration with English labels. Expand the guide below for shape descriptions and metric/inch size tables. Tap the image to enlarge.

Shape: choose the outline you love

Shape What to compare
Round Classic outline, cut quality and diameter.
Oval, pear and marquise Elongated outlines; compare length × width and appearance in motion.
Emerald and Asscher Step facets; compare transparency and the pattern of reflections.
Princess, cushion and radiant Square or rectangular silhouettes; compare proportions and corner protection.

Visual illustrations by DANFÉE, based on the concepts explained in GIA's cut, color, clarity and carat weight guides. Illustrations are educational, not grading tools.

Compare the outline you love with the stone's actual dimensions. This guide brings together ten shapes and nine reference weights, with metric and inch measurements side by side.

1. Diamond shapes at a glance
Shape Appearance and what to compare
Round Circular outline; compare cut assessment and actual diameter.
Princess Square outline with pointed corners; compare proportions and corner protection.
Emerald Rectangular step facets; compare transparency, proportions and reflections.
Cushion Rounded corners with square or rectangular proportions; compare outline and facet pattern.
Asscher Square step-cut outline with clipped corners; compare symmetry and transparency.
Radiant Square or rectangular outline with clipped corners and brilliant-style facets.
Pear Teardrop outline; compare symmetry, length-to-width ratio and point protection.
Marquise Long outline with two points; compare symmetry, proportions and point protection.
Oval Rounded elongated outline; compare length and width and appearance in motion.
Heart Heart-shaped outline; compare balanced lobes, a defined cleft and point protection.
2. Full size reference illustration
English diamond carat size chart showing ten shapes from 0.25 to 5 carats, with approximate millimeter dimensions
High-resolution reference chart on a white background. Use the tables below for metric and inch values and accompanying webpage text. Tap the chart to enlarge.

Dimensions are transcribed from the supplied reference chart. Inch equivalents are calculated by DANFÉE and rounded to three decimal places. These are approximate educational examples, not specifications for every diamond. Check the individual stone's laboratory report and product measurements; images are not displayed at actual size.

3. Carat and size: millimeters and inches

Open a shape below to view all nine weights from 0.25 to 5.00 ct. Round values show approximate diameter. The single values for princess, Asscher and heart follow the width listed in the reference chart; other shapes use length × width.

1 in = 25.4 mm. Millimeters are commonly used in both US and European jewelry specifications; inches are an additional reference. Carat measures weight, so equal carat weights can have different visible dimensions.

Round · 0.25–5.00 ct · mm / inches
Round · approximate stone dimensions
Weight · ct Metric · mm US customary · inches
0.25 ct 4.1 mm 0.161 in
0.50 ct 5.1 mm 0.201 in
0.75 ct 5.8 mm 0.228 in
1.00 ct 6.4 mm 0.252 in
1.50 ct 7.4 mm 0.291 in
2.00 ct 8.1 mm 0.319 in
3.00 ct 9.3 mm 0.366 in
4.00 ct 10.2 mm 0.402 in
5.00 ct 11 mm 0.433 in
Princess · 0.25–5.00 ct · mm / inches
Princess · approximate stone dimensions
Weight · ct Metric · mm US customary · inches
0.25 ct 3.5 mm 0.138 in
0.50 ct 4.4 mm 0.173 in
0.75 ct 5 mm 0.197 in
1.00 ct 5.5 mm 0.217 in
1.50 ct 6.4 mm 0.252 in
2.00 ct 7 mm 0.276 in
3.00 ct 8 mm 0.315 in
4.00 ct 9 mm 0.354 in
5.00 ct 9.5 mm 0.374 in
Emerald · 0.25–5.00 ct · mm / inches
Emerald · approximate stone dimensions
Weight · ct Metric · mm US customary · inches
0.25 ct 4.5 × 3 mm 0.177 × 0.118 in
0.50 ct 5.5 × 4 mm 0.217 × 0.157 in
0.75 ct 6 × 4.5 mm 0.236 × 0.177 in
1.00 ct 6.5 × 5 mm 0.256 × 0.197 in
1.50 ct 7.5 × 5.5 mm 0.295 × 0.217 in
2.00 ct 8.5 × 6 mm 0.335 × 0.236 in
3.00 ct 9.5 × 7 mm 0.374 × 0.276 in
4.00 ct 10.5 × 7.5 mm 0.413 × 0.295 in
5.00 ct 11.5 × 8.5 mm 0.453 × 0.335 in
Cushion · 0.25–5.00 ct · mm / inches
Cushion · approximate stone dimensions
Weight · ct Metric · mm US customary · inches
0.25 ct 4 × 3.5 mm 0.157 × 0.138 in
0.50 ct 5 × 4.5 mm 0.197 × 0.177 in
0.75 ct 6 × 5 mm 0.236 × 0.197 in
1.00 ct 6.5 × 5.5 mm 0.256 × 0.217 in
1.50 ct 7.5 × 6.5 mm 0.295 × 0.256 in
2.00 ct 8 × 7 mm 0.315 × 0.276 in
3.00 ct 9 × 8 mm 0.354 × 0.315 in
4.00 ct 10 × 8.5 mm 0.394 × 0.335 in
5.00 ct 10.5 × 9 mm 0.413 × 0.354 in
Asscher · 0.25–5.00 ct · mm / inches
Asscher · approximate stone dimensions
Weight · ct Metric · mm US customary · inches
0.25 ct 3.7 mm 0.146 in
0.50 ct 4.4 mm 0.173 in
0.75 ct 5 mm 0.197 in
1.00 ct 5.5 mm 0.217 in
1.50 ct 6.4 mm 0.252 in
2.00 ct 7 mm 0.276 in
3.00 ct 8.1 mm 0.319 in
4.00 ct 9 mm 0.354 in
5.00 ct 9.6 mm 0.378 in
Radiant · 0.25–5.00 ct · mm / inches
Radiant · approximate stone dimensions
Weight · ct Metric · mm US customary · inches
0.25 ct 3.5 × 3 mm 0.138 × 0.118 in
0.50 ct 5 × 4.5 mm 0.197 × 0.177 in
0.75 ct 5.5 × 5 mm 0.217 × 0.197 in
1.00 ct 6 × 5.5 mm 0.236 × 0.217 in
1.50 ct 7 × 6 mm 0.276 × 0.236 in
2.00 ct 7.5 × 7 mm 0.295 × 0.276 in
3.00 ct 8.5 × 7.5 mm 0.335 × 0.295 in
4.00 ct 9.5 × 8.5 mm 0.374 × 0.335 in
5.00 ct 10 × 9 mm 0.394 × 0.354 in
Pear · 0.25–5.00 ct · mm / inches
Pear · approximate stone dimensions
Weight · ct Metric · mm US customary · inches
0.25 ct 5.5 × 3.5 mm 0.217 × 0.138 in
0.50 ct 7 × 4.5 mm 0.276 × 0.177 in
0.75 ct 8 × 5 mm 0.315 × 0.197 in
1.00 ct 8.5 × 5.5 mm 0.335 × 0.217 in
1.50 ct 10 × 6.5 mm 0.394 × 0.256 in
2.00 ct 10.5 × 7 mm 0.413 × 0.276 in
3.00 ct 12.5 × 8 mm 0.492 × 0.315 in
4.00 ct 13.5 × 9 mm 0.531 × 0.354 in
5.00 ct 15 × 10 mm 0.591 × 0.394 in
Marquise · 0.25–5.00 ct · mm / inches
Marquise · approximate stone dimensions
Weight · ct Metric · mm US customary · inches
0.25 ct 6.5 × 3 mm 0.256 × 0.118 in
0.50 ct 8.5 × 4 mm 0.335 × 0.157 in
0.75 ct 9.5 × 4.5 mm 0.374 × 0.177 in
1.00 ct 10.5 × 5 mm 0.413 × 0.197 in
1.50 ct 12 × 6 mm 0.472 × 0.236 in
2.00 ct 13 × 6.5 mm 0.512 × 0.256 in
3.00 ct 14 × 7 mm 0.551 × 0.276 in
4.00 ct 16 × 8 mm 0.630 × 0.315 in
5.00 ct 17 × 8.5 mm 0.669 × 0.335 in
Oval · 0.25–5.00 ct · mm / inches
Oval · approximate stone dimensions
Weight · ct Metric · mm US customary · inches
0.25 ct 5 × 3 mm 0.197 × 0.118 in
0.50 ct 6 × 4 mm 0.236 × 0.157 in
0.75 ct 7.5 × 5 mm 0.295 × 0.197 in
1.00 ct 8 × 5.5 mm 0.315 × 0.217 in
1.50 ct 9 × 6 mm 0.354 × 0.236 in
2.00 ct 10.5 × 7 mm 0.413 × 0.276 in
3.00 ct 11.5 × 7.5 mm 0.453 × 0.295 in
4.00 ct 13 × 8.5 mm 0.512 × 0.335 in
5.00 ct 14 × 9.5 mm 0.551 × 0.374 in
Heart · 0.25–5.00 ct · mm / inches
Heart · approximate stone dimensions
Weight · ct Metric · mm US customary · inches
0.25 ct 4.2 mm 0.165 in
0.50 ct 5.4 mm 0.213 in
0.75 ct 6 mm 0.236 in
1.00 ct 6.7 mm 0.264 in
1.50 ct 7.6 mm 0.299 in
2.00 ct 8.3 mm 0.327 in
3.00 ct 9.5 mm 0.374 in
4.00 ct 10.3 mm 0.406 in
5.00 ct 11 mm 0.433 in

3. Decide between natural and laboratory-grown diamonds

Natural and laboratory-grown diamonds have different origins. Laboratory-grown diamonds have essentially the same chemical composition, crystal structure and physical and optical properties as natural diamonds. Moissanite and cubic zirconia are different materials.

Source: GIA: Natural and Laboratory-Grown Diamonds.

Make origin an explicit part of your comparison, then assess the individual stone's quality, design and price. A photograph alone cannot reliably establish origin. Look for clear product disclosure and a report identifying the diamond.

At DANFÉE, we provide IGI reports for our laboratory-grown diamonds and GIA reports for our natural diamonds. Check the individual product's specifications and accompanying report details.

The Advantages of Lab-Grown Diamonds

  • A more accessible price. Lab-grown diamonds generally cost less than natural diamonds of comparable size and quality, offering greater flexibility within your budget. Prices vary by stone and retailer.
  • More room for your preferred size and quality. A lower purchase price can make a larger stone or preferred color and clarity characteristics more attainable. Compare cut and measurements as carefully as carat weight.
  • Diamond brilliance and durability. Lab-grown diamonds offer essentially the same optical and physical properties as natural diamonds. Their beauty still depends on the individual stone and its cutting quality; both require care to avoid chipping.
  • More freedom to complete your design. Savings on the gemstone can leave room for your preferred precious metal, setting and craftsmanship, or help you build a coordinated jewelry collection.

Further reading: GIA: Lab-Grown Diamond Jewelry. Choose for personal enjoyment; neither diamond origin guarantees future resale value.

Part II. Jewelry Selection Guide

1. Diamond Necklaces

DANFÉE diamond necklace collection image showing a round diamond pendant worn with a navy dress
Diamond necklace styling from the DANFÉE collection. Consider the pendant's dimensions, chain length and neckline together. Use the individual product's measurements for your selection.

Necklace lengths: US and metric reference

Length · inches Length · centimeters
16 in 40.6 cm
18 in 45.7 cm
20 in 50.8 cm
22 in 55.9 cm

These are unit conversions, not promises about where a necklace will sit. Measure a necklace you like, including its clasp, and compare the available length and extender. Product specifications take precedence.

2. Diamond Rings

Diamond rings worn on a hand, illustrating band width and finger proportions
Diamond ring styling: consider band width, finger proportions and comfort alongside the stone. Image is a style reference; use the individual product's measurements.

How to measure your ring size

Use either the inside diameter of a ring that fits or your finger circumference. Keep these two measurements separate, then open the matching country or size-system row below.

Method 1: measure a ring you already own
Ring viewed from above with an arrow spanning the inner opening and guides aligned to a millimeter ruler
Measure straight across the inside opening. Exclude the metal edges. Example: 16.5 mm (0.650 in).
  1. Choose a ring that fits the same finger on the same hand.
  2. Lay it flat and measure across the widest part of its inside opening, from inner edge to inner edge.
  3. Match the result to the inside-diameter column in the appropriate country table.
Method 2: measure your finger with a paper strip
A paper strip wrapped around a finger with its overlap point marked
1. Wrap a narrow, non-stretch strip around the finger and mark the overlap.
A flattened paper strip aligned with zero on a millimeter ruler, showing the marked length
2. Flatten the strip and measure from zero to the mark. Example: 51.9 mm (2.043 in).
  1. Wrap a narrow strip of paper snugly around your finger, without pressing into the skin.
  2. Mark the overlap, then flatten the strip and measure from its starting end to the mark in millimeters.
  3. Use the inside-circumference column below. Check that the fit also allows the ring to pass over your knuckle.

Example: an inside diameter of about 16.5 mm (0.650 in), or a circumference of about 51.9 mm (2.043 in), corresponds to approximately US 6 / EU 52.

Repeat the measurement at a comfortable room temperature. Paper-strip measurements are approximate; confirm the final fit with a professional ring sizer, especially for wide bands or measurements between sizes. These drawings explain the method and are not printable or on-screen measuring tools. Click any diagram to enlarge.

Diagrams by DANFÉE. Measurement references: Tiffany & Co. and Cartier.

Ring sizes by country and size system

Choose the same country or size-system group as on the diamond-ring product page, then open its row below. The size labels follow the options offered by DANFÉE.

US / Canada measurements are shown in mm and inches. Europe uses mm. The UK / Australia / New Zealand, Italy / Spain, Japan, South Korea and Taiwan tables use mm and cm. Identical numbers in different systems do not necessarily indicate the same fit. Compare a ring with the inside-diameter column, or a paper-strip measurement with the inside-circumference column. Confirm the final size with a professional ring sizer.

United States / Canada

US and Canadian sizes use the same numerical scale. The product selector offers 3–13 in half-size steps.

US / Canada sizes 3–13
US / Canada size Approx. inside circumference (mm / in) Approx. inside diameter (mm / in)
3 44.2 mm / 1.740 in 14.1 mm / 0.555 in
3.5 45.5 mm / 1.791 in 14.5 mm / 0.571 in
4 46.8 mm / 1.843 in 14.9 mm / 0.587 in
4.5 48.0 mm / 1.890 in 15.3 mm / 0.602 in
5 49.3 mm / 1.941 in 15.7 mm / 0.618 in
5.5 50.6 mm / 1.992 in 16.1 mm / 0.634 in
6 51.9 mm / 2.043 in 16.5 mm / 0.650 in
6.5 53.1 mm / 2.091 in 16.9 mm / 0.665 in
7 54.4 mm / 2.142 in 17.3 mm / 0.681 in
7.5 55.7 mm / 2.193 in 17.7 mm / 0.697 in
8 57.0 mm / 2.244 in 18.1 mm / 0.713 in
8.5 58.3 mm / 2.295 in 18.5 mm / 0.728 in
9 59.5 mm / 2.343 in 18.9 mm / 0.744 in
9.5 60.8 mm / 2.394 in 19.4 mm / 0.764 in
10 62.1 mm / 2.445 in 19.8 mm / 0.780 in
10.5 63.4 mm / 2.496 in 20.2 mm / 0.795 in
11 64.6 mm / 2.543 in 20.6 mm / 0.811 in
11.5 65.9 mm / 2.594 in 21.0 mm / 0.827 in
12 67.2 mm / 2.646 in 21.4 mm / 0.843 in
12.5 68.5 mm / 2.697 in 21.8 mm / 0.858 in
13 69.7 mm / 2.744 in 22.2 mm / 0.874 in

Dimensions follow Tiffany & Co.; inch values are calculated (1 in = 25.4 mm). Confirm the final fit, especially for wide bands.

Europe — EU circumference sizes

In this EU circumference system, the size number represents the approximate inside circumference in millimeters. The product selector offers 44–74. Italy and Spain are listed separately below.

EU circumference sizes 44–74
EU size Approx. inside circumference (mm) Calculated inside diameter (mm)
44 44.0 mm 14.0 mm
45 45.0 mm 14.3 mm
46 46.0 mm 14.6 mm
47 47.0 mm 15.0 mm
48 48.0 mm 15.3 mm
49 49.0 mm 15.6 mm
50 50.0 mm 15.9 mm
51 51.0 mm 16.2 mm
52 52.0 mm 16.6 mm
53 53.0 mm 16.9 mm
54 54.0 mm 17.2 mm
55 55.0 mm 17.5 mm
56 56.0 mm 17.8 mm
57 57.0 mm 18.1 mm
58 58.0 mm 18.5 mm
59 59.0 mm 18.8 mm
60 60.0 mm 19.1 mm
61 61.0 mm 19.4 mm
62 62.0 mm 19.7 mm
63 63.0 mm 20.1 mm
64 64.0 mm 20.4 mm
65 65.0 mm 20.7 mm
66 66.0 mm 21.0 mm
67 67.0 mm 21.3 mm
68 68.0 mm 21.6 mm
69 69.0 mm 22.0 mm
70 70.0 mm 22.3 mm
71 71.0 mm 22.6 mm
72 72.0 mm 22.9 mm
73 73.0 mm 23.2 mm
74 74.0 mm 23.6 mm

Diameter is calculated as circumference ÷ π. Rounded dimensions are a guide; local conventions and product fit can vary.

United Kingdom / Australia / New Zealand

These countries commonly use letter sizes. Select the same group on the product page, then choose F–Z, including half sizes. Measurements below use millimeters and centimeters.

Letter sizes F–Z: approximate inside measurements
UK / Australia / New Zealand size Inside diameter (mm / cm) Inside circumference (mm / cm)
F 14.00 mm / 1.400 cm 44.0 mm / 4.398 cm
F½ 14.20 mm / 1.420 cm 44.6 mm / 4.461 cm
G 14.40 mm / 1.440 cm 45.2 mm / 4.524 cm
G½ 14.70 mm / 1.470 cm 46.2 mm / 4.618 cm
H 14.80 mm / 1.480 cm 46.5 mm / 4.650 cm
H½ 15.00 mm / 1.500 cm 47.1 mm / 4.712 cm
I 15.26 mm / 1.526 cm 47.9 mm / 4.794 cm
I½ 15.35 mm / 1.535 cm 48.2 mm / 4.822 cm
J 15.62 mm / 1.562 cm 49.1 mm / 4.907 cm
J½ 15.90 mm / 1.590 cm 50.0 mm / 4.995 cm
K 16.00 mm / 1.600 cm 50.3 mm / 5.027 cm
K½ 16.30 mm / 1.630 cm 51.2 mm / 5.121 cm
L 16.44 mm / 1.644 cm 51.6 mm / 5.165 cm
L½ 16.60 mm / 1.660 cm 52.2 mm / 5.215 cm
M 16.80 mm / 1.680 cm 52.8 mm / 5.278 cm
M½ 17.00 mm / 1.700 cm 53.4 mm / 5.341 cm
N 17.18 mm / 1.718 cm 54.0 mm / 5.397 cm
N½ 17.40 mm / 1.740 cm 54.7 mm / 5.466 cm
O 17.55 mm / 1.755 cm 55.1 mm / 5.513 cm
O½ 17.80 mm / 1.780 cm 55.9 mm / 5.592 cm
P 18.00 mm / 1.800 cm 56.5 mm / 5.655 cm
P½ 18.20 mm / 1.820 cm 57.2 mm / 5.718 cm
Q 18.30 mm / 1.830 cm 57.5 mm / 5.749 cm
Q½ 18.60 mm / 1.860 cm 58.4 mm / 5.843 cm
R 18.80 mm / 1.880 cm 59.1 mm / 5.906 cm
R½ 19.00 mm / 1.900 cm 59.7 mm / 5.969 cm
S 19.20 mm / 1.920 cm 60.3 mm / 6.032 cm
S½ 19.40 mm / 1.940 cm 60.9 mm / 6.095 cm
T 19.60 mm / 1.960 cm 61.6 mm / 6.158 cm
T½ 19.80 mm / 1.980 cm 62.2 mm / 6.220 cm
U 20.10 mm / 2.010 cm 63.1 mm / 6.315 cm
U½ 20.20 mm / 2.020 cm 63.5 mm / 6.346 cm
V 20.40 mm / 2.040 cm 64.1 mm / 6.409 cm
V½ 20.60 mm / 2.060 cm 64.7 mm / 6.472 cm
W 20.80 mm / 2.080 cm 65.3 mm / 6.535 cm
W½ 21.00 mm / 2.100 cm 66.0 mm / 6.597 cm
X 21.10 mm / 2.110 cm 66.3 mm / 6.629 cm
X½ 21.40 mm / 2.140 cm 67.2 mm / 6.723 cm
Y 21.50 mm / 2.150 cm 67.5 mm / 6.754 cm
Y½ 21.70 mm / 2.170 cm 68.2 mm / 6.817 cm
Z 21.90 mm / 2.190 cm 68.8 mm / 6.880 cm

All values are approximate. Circumference is calculated from nominal diameter using π; centimeters are converted from millimeters (1 cm = 10 mm). On mobile, swipe the table horizontally to see all columns. Diameter reference: Michael Hill Australia / New Zealand. Letter-size measurements can differ slightly between brands and measuring tools; confirm your letter size and measured dimensions before ordering.

Italy / Spain

Choose Italy / Spain on the product page, then select 4–34. This reference uses the common local numerical convention: inside circumference (mm) = local size + 40. For example, local size 12 corresponds to 52 mm (5.200 cm), approximately EU 52.

Italy / Spain sizes 4–34: approximate inside measurements
Italy / Spain size Inside diameter (mm / cm) Inside circumference (mm / cm)
4 14.01 mm / 1.401 cm 44.0 mm / 4.400 cm
5 14.32 mm / 1.432 cm 45.0 mm / 4.500 cm
6 14.64 mm / 1.464 cm 46.0 mm / 4.600 cm
7 14.96 mm / 1.496 cm 47.0 mm / 4.700 cm
8 15.28 mm / 1.528 cm 48.0 mm / 4.800 cm
9 15.60 mm / 1.560 cm 49.0 mm / 4.900 cm
10 15.92 mm / 1.592 cm 50.0 mm / 5.000 cm
11 16.23 mm / 1.623 cm 51.0 mm / 5.100 cm
12 16.55 mm / 1.655 cm 52.0 mm / 5.200 cm
13 16.87 mm / 1.687 cm 53.0 mm / 5.300 cm
14 17.19 mm / 1.719 cm 54.0 mm / 5.400 cm
15 17.51 mm / 1.751 cm 55.0 mm / 5.500 cm
16 17.83 mm / 1.783 cm 56.0 mm / 5.600 cm
17 18.14 mm / 1.814 cm 57.0 mm / 5.700 cm
18 18.46 mm / 1.846 cm 58.0 mm / 5.800 cm
19 18.78 mm / 1.878 cm 59.0 mm / 5.900 cm
20 19.10 mm / 1.910 cm 60.0 mm / 6.000 cm
21 19.42 mm / 1.942 cm 61.0 mm / 6.100 cm
22 19.74 mm / 1.974 cm 62.0 mm / 6.200 cm
23 20.05 mm / 2.005 cm 63.0 mm / 6.300 cm
24 20.37 mm / 2.037 cm 64.0 mm / 6.400 cm
25 20.69 mm / 2.069 cm 65.0 mm / 6.500 cm
26 21.01 mm / 2.101 cm 66.0 mm / 6.600 cm
27 21.33 mm / 2.133 cm 67.0 mm / 6.700 cm
28 21.65 mm / 2.165 cm 68.0 mm / 6.800 cm
29 21.96 mm / 2.196 cm 69.0 mm / 6.900 cm
30 22.28 mm / 2.228 cm 70.0 mm / 7.000 cm
31 22.60 mm / 2.260 cm 71.0 mm / 7.100 cm
32 22.92 mm / 2.292 cm 72.0 mm / 7.200 cm
33 23.24 mm / 2.324 cm 73.0 mm / 7.300 cm
34 23.55 mm / 2.355 cm 74.0 mm / 7.400 cm

Diameter is calculated as circumference ÷ π; 1 cm = 10 mm. References: NUGAE Italian conversion guide and TOUS Spain ring size guide. Brands and measuring tools can vary; confirm the final fit. On mobile, swipe horizontally to see all columns.

Japan

Choose Japan on the product page. This common numerical reference starts at an inside diameter of 13 mm for size 1, increasing by approximately one-third of a millimeter per size.

Japan sizes 1–30: approximate inside measurements
Japan size Inside diameter (mm / cm) Inside circumference (mm / cm)
1 13.00 mm / 1.300 cm 40.8 mm / 4.084 cm
2 13.33 mm / 1.333 cm 41.9 mm / 4.189 cm
3 13.67 mm / 1.367 cm 42.9 mm / 4.294 cm
4 14.00 mm / 1.400 cm 44.0 mm / 4.398 cm
5 14.33 mm / 1.433 cm 45.0 mm / 4.503 cm
6 14.67 mm / 1.467 cm 46.1 mm / 4.608 cm
7 15.00 mm / 1.500 cm 47.1 mm / 4.712 cm
8 15.33 mm / 1.533 cm 48.2 mm / 4.817 cm
9 15.67 mm / 1.567 cm 49.2 mm / 4.922 cm
10 16.00 mm / 1.600 cm 50.3 mm / 5.027 cm
11 16.33 mm / 1.633 cm 51.3 mm / 5.131 cm
12 16.67 mm / 1.667 cm 52.4 mm / 5.236 cm
13 17.00 mm / 1.700 cm 53.4 mm / 5.341 cm
14 17.33 mm / 1.733 cm 54.5 mm / 5.445 cm
15 17.67 mm / 1.767 cm 55.5 mm / 5.550 cm
16 18.00 mm / 1.800 cm 56.5 mm / 5.655 cm
17 18.33 mm / 1.833 cm 57.6 mm / 5.760 cm
18 18.67 mm / 1.867 cm 58.6 mm / 5.864 cm
19 19.00 mm / 1.900 cm 59.7 mm / 5.969 cm
20 19.33 mm / 1.933 cm 60.7 mm / 6.074 cm
21 19.67 mm / 1.967 cm 61.8 mm / 6.178 cm
22 20.00 mm / 2.000 cm 62.8 mm / 6.283 cm
23 20.33 mm / 2.033 cm 63.9 mm / 6.388 cm
24 20.67 mm / 2.067 cm 64.9 mm / 6.493 cm
25 21.00 mm / 2.100 cm 66.0 mm / 6.597 cm
26 21.33 mm / 2.133 cm 67.0 mm / 6.702 cm
27 21.67 mm / 2.167 cm 68.1 mm / 6.807 cm
28 22.00 mm / 2.200 cm 69.1 mm / 6.912 cm
29 22.33 mm / 2.233 cm 70.2 mm / 7.016 cm
30 22.67 mm / 2.267 cm 71.2 mm / 7.121 cm

All values are approximate. Circumference is calculated from nominal diameter using π; centimeters are converted from millimeters (1 cm = 10 mm). On mobile, swipe the table horizontally to see all columns. Reference: I-PRIMO size guide. Small rounding differences between charts are normal; confirm your measured dimensions and final fit.

South Korea

Choose Korea on the product page. This reference follows the nominal inside-diameter progression shown in Korean KS guides: 13 mm at size 1, increasing by approximately one-third of a millimeter per size.

South Korea sizes 1–30: approximate inside measurements
South Korea size Inside diameter (mm / cm) Inside circumference (mm / cm)
1 13.00 mm / 1.300 cm 40.8 mm / 4.084 cm
2 13.33 mm / 1.333 cm 41.9 mm / 4.189 cm
3 13.67 mm / 1.367 cm 42.9 mm / 4.294 cm
4 14.00 mm / 1.400 cm 44.0 mm / 4.398 cm
5 14.33 mm / 1.433 cm 45.0 mm / 4.503 cm
6 14.67 mm / 1.467 cm 46.1 mm / 4.608 cm
7 15.00 mm / 1.500 cm 47.1 mm / 4.712 cm
8 15.33 mm / 1.533 cm 48.2 mm / 4.817 cm
9 15.67 mm / 1.567 cm 49.2 mm / 4.922 cm
10 16.00 mm / 1.600 cm 50.3 mm / 5.027 cm
11 16.33 mm / 1.633 cm 51.3 mm / 5.131 cm
12 16.67 mm / 1.667 cm 52.4 mm / 5.236 cm
13 17.00 mm / 1.700 cm 53.4 mm / 5.341 cm
14 17.33 mm / 1.733 cm 54.5 mm / 5.445 cm
15 17.67 mm / 1.767 cm 55.5 mm / 5.550 cm
16 18.00 mm / 1.800 cm 56.5 mm / 5.655 cm
17 18.33 mm / 1.833 cm 57.6 mm / 5.760 cm
18 18.67 mm / 1.867 cm 58.6 mm / 5.864 cm
19 19.00 mm / 1.900 cm 59.7 mm / 5.969 cm
20 19.33 mm / 1.933 cm 60.7 mm / 6.074 cm
21 19.67 mm / 1.967 cm 61.8 mm / 6.178 cm
22 20.00 mm / 2.000 cm 62.8 mm / 6.283 cm
23 20.33 mm / 2.033 cm 63.9 mm / 6.388 cm
24 20.67 mm / 2.067 cm 64.9 mm / 6.493 cm
25 21.00 mm / 2.100 cm 66.0 mm / 6.597 cm
26 21.33 mm / 2.133 cm 67.0 mm / 6.702 cm
27 21.67 mm / 2.167 cm 68.1 mm / 6.807 cm
28 22.00 mm / 2.200 cm 69.1 mm / 6.912 cm
29 22.33 mm / 2.233 cm 70.2 mm / 7.016 cm
30 22.67 mm / 2.267 cm 71.2 mm / 7.121 cm

All values are approximate. Circumference is calculated from nominal diameter using π; centimeters are converted from millimeters (1 cm = 10 mm). On mobile, swipe the table horizontally to see all columns. These are ring inner dimensions, not the separate finger-circumference values in some Korean measuring guides. If you used a Korean ring gauge, confirm its sizing convention before ordering. Reference: Five & Plus KS size guide.

Taiwan

Choose Taiwan on the product page. This table uses the common Taiwan international-size convention: nominal inside diameter (mm) = 11 + 0.5 × size. This local convention differs from ISO / EU circumference sizing.

Taiwan sizes 1–30: approximate international-size reference
Taiwan size Inside diameter (mm / cm) Inside circumference (mm / cm)
1 11.50 mm / 1.150 cm 36.1 mm / 3.613 cm
2 12.00 mm / 1.200 cm 37.7 mm / 3.770 cm
3 12.50 mm / 1.250 cm 39.3 mm / 3.927 cm
4 13.00 mm / 1.300 cm 40.8 mm / 4.084 cm
5 13.50 mm / 1.350 cm 42.4 mm / 4.241 cm
6 14.00 mm / 1.400 cm 44.0 mm / 4.398 cm
7 14.50 mm / 1.450 cm 45.6 mm / 4.555 cm
8 15.00 mm / 1.500 cm 47.1 mm / 4.712 cm
9 15.50 mm / 1.550 cm 48.7 mm / 4.869 cm
10 16.00 mm / 1.600 cm 50.3 mm / 5.027 cm
11 16.50 mm / 1.650 cm 51.8 mm / 5.184 cm
12 17.00 mm / 1.700 cm 53.4 mm / 5.341 cm
13 17.50 mm / 1.750 cm 55.0 mm / 5.498 cm
14 18.00 mm / 1.800 cm 56.5 mm / 5.655 cm
15 18.50 mm / 1.850 cm 58.1 mm / 5.812 cm
16 19.00 mm / 1.900 cm 59.7 mm / 5.969 cm
17 19.50 mm / 1.950 cm 61.3 mm / 6.126 cm
18 20.00 mm / 2.000 cm 62.8 mm / 6.283 cm
19 20.50 mm / 2.050 cm 64.4 mm / 6.440 cm
20 21.00 mm / 2.100 cm 66.0 mm / 6.597 cm
21 21.50 mm / 2.150 cm 67.5 mm / 6.754 cm
22 22.00 mm / 2.200 cm 69.1 mm / 6.912 cm
23 22.50 mm / 2.250 cm 70.7 mm / 7.069 cm
24 23.00 mm / 2.300 cm 72.3 mm / 7.226 cm
25 23.50 mm / 2.350 cm 73.8 mm / 7.383 cm
26 24.00 mm / 2.400 cm 75.4 mm / 7.540 cm
27 24.50 mm / 2.450 cm 77.0 mm / 7.697 cm
28 25.00 mm / 2.500 cm 78.5 mm / 7.854 cm
29 25.50 mm / 2.550 cm 80.1 mm / 8.011 cm
30 26.00 mm / 2.600 cm 81.7 mm / 8.168 cm

All values are approximate. Circumference is calculated from nominal diameter using π; centimeters are converted from millimeters (1 cm = 10 mm). On mobile, swipe the table horizontally to see all columns. Taiwan retailers may use other charts or Japanese sizes. Sizes 25–30 extend the same nominal diameter convention; confirm larger sizes and measured dimensions with DANFÉE before ordering. References: Jfull Taiwan size guide and ALUXE conversion guide.

3. Diamond Stud Earrings

Diamond studs: size and balance

Compare the diamond's diameter with the full setting width and consider how the earring sits on the ear. Check whether the quoted weight applies to one diamond or the pair.

Round diamond stud earring worn on an ear
Diamond stud styling: compare the stone's diameter and setting, and confirm whether the listed carat weight is per stone or for the pair.

4. Diamond Bracelets

Diamond bracelet worn around the wrist
Diamond bracelet styling: consider its finished width, fit and freedom of movement. Confirm the length and clasp details of your chosen design.

A diamond bracelet should feel comfortable as your wrist moves. Choose between a continuous line of stones, such as a tennis bracelet, and a lighter chain design featuring one or several diamonds. Compare the complete piece: its width, flexibility, weight and fastening all contribute to how it wears.

Length and fit: measure your wrist first

Measure your wrist before choosing a diamond tennis or chain bracelet. Wrist circumference and finished bracelet length are different: the bracelet also needs room for comfortable movement.

Three steps: wrap a strip around the wrist and mark the overlap; read the marked strip against a centimeter ruler; measure a diamond tennis bracelet including its clasp.
Three-step measuring guide by DANFÉE. The ruler shows an example wrist measurement of 16.0 cm (6.30 in). Click to enlarge; the drawings are not actual-size measuring tools.
  1. Wrap and mark. Place a flexible tape or narrow, non-stretch paper strip around the wrist where the bracelet will sit, checking the wrist joint as well. Keep it snug without pressing into the skin. With a strip, mark where the end overlaps.
  2. Read your wrist measurement. Flatten the strip and measure from its starting end to the mark, aligning the start with zero on a ruler. Record the length in centimeters or inches. The illustrated example is 16.0 cm (6.30 in).
  3. Check the finished bracelet length. Lay a flexible bracelet that already fits comfortably flat, then measure from end to end, including the clasp as illustrated. Confirm how the chosen product measures its finished length, along with its adjustment range and clasp.

A flexible bracelet should move comfortably without feeling tight or slipping too far over the hand. Do not order a bracelet equal to your bare wrist measurement without checking its design and fit. Send DANFÉE your wrist measurement and preferred fit if you need help choosing a length. A cuff or rigid bangle needs its own sizing method.

Measurement reference: Tiffany & Co. Bracelet Size Guide. Confirm the individual product's sizing instructions before ordering.

Bracelet length conversion · metric and US customary
Finished length · cm Finished length · in
16.0 cm 6.30 in
16.5 cm 6.50 in
17.0 cm 6.69 in
17.5 cm 6.89 in
18.0 cm 7.09 in
18.5 cm 7.28 in
19.0 cm 7.48 in
20.0 cm 7.87 in

Unit conversions only; this table is not a wrist-to-bracelet size prescription or a list of available DANFÉE sizes. Check the individual product. Measurement guidance: Tiffany & Co. Bracelet Size Guide.

Total carat weight does not mean one large diamond

For a multi-stone bracelet, total carat weight is the combined weight of its diamonds. As an arithmetic example, 50 equal diamonds totaling 3.00 ct would average 0.06 ct each. That example does not describe a particular DANFÉE bracelet.

Compare the stone count, individual dimensions and finished width as well as total weight. A longer bracelet can distribute the same total weight among more stones. A single-diamond chain bracelet should clearly identify its main stone's weight.

Look for an even line of sparkle

For a tennis bracelet, look for visually consistent color, stone size and brightness along its length. View it laid flat and in motion. Prong settings leave more of each stone visible; bezel settings surround the stone with a metal rim. Examine the quality and comfort of the individual setting rather than choosing by its name alone.

Check the clasp and everyday comfort

Ask how the clasp closes, whether a secondary safety catch is included, and how the links move. Check for rough edges or areas that catch on clothing. Inspect the fastening and settings regularly; have a jeweler address a loose stone or unreliable clasp before wearing the bracelet again.

Confirm whether any supplied report covers the finished bracelet or particular stones. Do not assume that every small diamond has its own individual grading report.

Further reading: GIA Tennis Bracelet Buying Guide.

Explore DANFÉE Diamond Bracelets.

Part III. Verify the report before you buy

  1. Locate the report number. Read the stone's stated origin, shape, weight, measurements and grading results.
  2. Use the laboratory's official site: IGI Report Verification or GIA Report Check.
  3. Compare the record. Confirm it agrees with the report and product description, including any treatment comments.
  4. Match the stone when needed. A jeweler or laboratory can compare the physical diamond with its report, including a laser inscription where present.

A valid online record alone does not prove that a particular stone is the one described. A grading report documents characteristics; it is not a price appraisal or a guarantee of future resale value.

Further reading: IGI Laboratory-Grown Diamond Reports. Explore our guides to IGI reports and GIA and natural diamonds.

Part IV. Diamond Care and Maintenance

Thoughtful care helps preserve your jewelry's sparkle and keeps its setting secure. Natural and laboratory-grown diamonds need similar care; always consider the metal, other gemstones and any treatments in the finished piece.

1. Clean gently at home

For untreated diamond jewelry with a secure setting, use lukewarm water, a little mild dish soap and a soft, clean brush. Gently remove buildup, rinse in a bowl rather than over an open drain, and dry with a soft, lint-free cloth. Follow the jeweler's instructions for mixed-gemstone or treated pieces.

2. Protect it during everyday wear

Remove jewelry before heavy exercise, gardening or housework. Avoid impacts, bleach and abrasive cleaners. Put jewelry on after applying cosmetics to reduce buildup. Diamond resists scratching, but a hard knock can chip it or damage the setting.

3. Store each piece separately

Use individual soft pouches or lined compartments to prevent diamonds from scratching other jewelry. Keep chains separated to reduce tangling.

4. Check settings and clasps regularly

If a stone moves, a prong catches or a clasp feels insecure, stop wearing the piece and have a jeweler inspect it. Arrange professional checks according to wear and the setting's condition.

Leave ultrasonic and steam cleaning to a professional. These methods can loosen stones or damage certain treated gems. A jeweler should assess the entire piece first.

Care references: GIA: Diamond Care and Cleaning Guide and GIA: Tips on Caring for Jewelry.

Your final buying checklist

  • Origin clearly stated: natural or laboratory-grown.
  • Shape, actual dimensions and appearance suit your preferences.
  • Carat weight clearly identified as per stone, center stone or total.
  • Cut, color and clarity considered together with photographs or video.
  • Metal, setting, necklace length, bracelet length or ring size confirmed.
  • For bracelets: stone count, total carat weight, fit and clasp details checked.
  • Laboratory report verified and matched to the stone where needed.
  • Processing time, delivery terms and return conditions checked for the specific order.

Find your own balance of brilliance

Explore diamond jewelry with proportions and details that feel right for you.

Diamond Necklaces  ·  Diamond Rings  ·  Diamond Earrings  ·  Diamond Bracelets

Written by DANFÉE using the official educational resources linked throughout this guide. Styling suggestions are editorial guidance. Reference measurements are approximate and are not specifications for every DANFÉE product. This independent guide does not imply affiliation with or endorsement by the organizations cited.

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.